Commit 6106dbd1 authored by Frantisek Mikulu's avatar Frantisek Mikulu

Merge remote-tracking branch 'origin/master' into feature/metadata

parents 7fad49e2 b9dbf487
......@@ -193,8 +193,14 @@
"value": {
"type": "integer"
},
"rfMode": {
"type": "string"
"rfModeStd": {
"type": "boolean"
},
"rfModeLp": {
"type": "boolean"
},
"stdAndLpNetwork": {
"type": "boolean"
}
}
},
......@@ -356,7 +362,7 @@
},
"nodeDpaInterface": {
"type": "boolean",
"description": "If set, then Node device can be controlled by a SPI or UART interface."
"description": "If set, then Node device can be controlled by a SPI or UART interface. Valid only in DPA version < 4.00"
},
"uartBaudrate": {
"type": "integer",
......@@ -377,6 +383,14 @@
"peerToPeer": {
"type": "boolean",
"description": "If set, then device receives also peer-to-peer (non-networking) packets and raises PeerToPeer event."
},
"neverSleep": {
"type": "boolean",
"description": "If set, then unbonded Node using default IQRF buttons never sleeps during the button bonding. From DPA v3.03"
},
"stdAndLpNetwork": {
"type": "boolean",
"description": "If the bit is set, then the [C] controls the STD+LP network; otherwise, it controls the STD network. The bit can only be changed if the network is empty (no [Ns] are bonded) otherwise the network will stop working. From DPA v4.00"
}
},
"required": []
......
......@@ -170,7 +170,7 @@
},
"nodeDpaInterface": {
"type": "boolean",
"description": "If set, then Node device can be controlled by a SPI or UART interface."
"description": "If set, then Node device can be controlled by a SPI or UART interface. Valid only in DPA version < 4.00"
},
"uartBaudrate": {
"type": "integer",
......@@ -195,6 +195,10 @@
"neverSleep": {
"type": "boolean",
"description": "If set, then unbonded Node using default IQRF buttons never sleeps during the button bonding. From DPA v3.03"
},
"stdAndLpNetwork": {
"type": "boolean",
"description": "If the bit is set, then the [C] controls the STD+LP network; otherwise, it controls the STD network. The bit can only be changed if the network is empty (no [Ns] are bonded) otherwise the network will stop working. From DPA v4.00"
}
},
"required": [
......
......@@ -179,7 +179,7 @@
},
"nodeDpaInterface": {
"type": "boolean",
"description": "If set, then Node device can be controlled by a SPI or UART interface."
"description": "If set, then Node device can be controlled by a SPI or UART interface. Valid only in DPA version < 4.00"
},
"uartBaudrate": {
"type": "integer",
......@@ -205,6 +205,10 @@
"type": "boolean",
"description": "If set, then unbonded Node using default IQRF buttons never sleeps during the button bonding. From DPA v3.03"
},
"stdAndLpNetwork": {
"type": "boolean",
"description": "If the bit is set, then the [C] controls the STD+LP network; otherwise, it controls the STD network. The bit can only be changed if the network is empty (no [Ns] are bonded) otherwise the network will stop working. From DPA v4.00"
},
"securityPassword": {
"type": "string",
"description": "It sets security password. If the field is left completely empty (no characters filled), the default password (16x number 0x00) is used (the same as the default set from the factory."
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment