ReadTrConfService shall return DP2P flag
It seems that the service does not implement reading of DP2P flag valid for DPA >= 4.10 as described at https://doc.iqrf.org/DpaTechGuide/410/
0x05 [*]
DPA configuration bits:
...
bit 1
If set, then DP2P is enabled at [N].
...
{
"mType": "iqmeshNetwork_ReadTrConf",
"data": {
"msgId": "testIqmeshRead",
"rsp": {
"deviceAddr": 1,
"embPers": {
"values": [
254,
2,
0,
0
],
"coordinator": false,
"node": true,
"os": true,
"eeprom": true,
"eeeprom": true,
"ram": true,
"ledr": true,
"ledg": true,
"spi": false,
"io": true,
"thermometer": false,
"pwm": false,
"uart": false
},
"customDpaHandler": true,
"dpaAutoexec": false,
"routingOff": false,
"ioSetup": false,
"peerToPeer": false,
"neverSleep": false,
"stdAndLpNetwork": true,
"rfChannelA": 42,
"rfChannelB": 2,
"txPower": 7,
"rxFilter": 5,
"lpRxTimeout": 6,
"rfAltDsmChannel": 0,
"uartBaudrate": 57600,
"rfPgmDualChannel": true,
"rfPgmLpMode": false,
"rfPgmIncorrectUpload": false,
"rfPgmEnableAfterReset": false,
"rfPgmTerminateAfter1Min": false,
"rfPgmTerminateMcuPin": true,
"rfBand": "868"
},
"raw": [
{
"request": "00.00.00.02.ff.ff",
"requestTs": "2020-10-13T20:51:00.793+02:00",
"confirmation": "",
"confirmationTs": "",
"response": "00.00.00.82.00.00.00.1d.fe.ff.ff.ff.ff.ff.ff.ff.ff.ff.ff.ff.ff.ff.ff.ff.7f.00.00.00.00.00.00.00.00.00.00.00.00.00.fe.81",
"responseTs": "2020-10-13T20:51:00.826+02:00"
},
{
"request": "01.00.02.02.ff.ff",
"requestTs": "2020-10-13T20:51:00.826+02:00",
"confirmation": "01.00.02.02.ff.ff.ff.1d.01.04.01",
"confirmationTs": "2020-10-13T20:51:00.844+02:00",
"response": "01.00.02.82.04.08.00.25.0c.fe.02.00.00.81.00.00.07.05.06.06.00.00.00.00.00.2a.02.00.00.00.00.00.00.00.00.00.00.00.04.00.83.20",
"responseTs": "2020-10-13T20:51:00.995+02:00"
}
],
"status": 0,
"statusStr": "ok",
"insId": "iqrfgd2-default"
}
}