Uart interface fail
IQRF daemon setup fails with UART interface:
admin@iqube:/etc/iqrf-gateway-daemon$ cat iqrf__IqrfUart.json
{
"component": "iqrf::IqrfUart",
"instance": "iqrf::IqrfUart-/dev/ttyS1",
"IqrfInterface": "/dev/ttyS1",
"baudRate": 57600,
"powerEnableGpioPin": 19,
"busEnableGpioPin": -1,
"uartEnableGpioPin": 6,
"spiEnableGpioPin": 10,
"i2cEnableGpioPin": 7,
"pgmSwitchGpioPin": -1,
"uartReset": true
}
HW is tested with same setup on Armbian and is working.
Edited by Rostislav Spinar